I have made a few replacement necks for Mosrites in the past. I get contacted by an owner who has an old Mosrite that has a bad neck and can't be played anymore.

This '66 Ventures bass neck had split along the centre line glue joint and was no longer playable or repairable.

I offer this service ONLY if the old neck is sent to me to copy off. Mosrites changed slightly from year to year and it's the only way of getting the new neck to be a guaranteed perfect fit.

The necks are made from Canadian rock maple and rosewood to exact specs and shapes. The lacquer can be yellowed or even "reliced" to match the original, if desired.

The original serial number is stamped into the fretboard and the original logo is screen printed under the lacquer, just as Mosrite did it.

The original tuners and string guide fit the new neck exactly.

These necks can also be made to fit a Mosrite but with wider or thicker neck profiles, different size frets or different fretboard materials or radius.

I have made replacement Mosrite necks for guitars that have been valued at original prices WITH my neck. This is piece of mind for owners of vintage guitars that can no longer be played.

Anyone requiring this service is welcome to contact me to discuss the process.

I only offer these necks for genuine restoration purposes and MUST have the old neck to copy, which can be sent back with the new neck if desired.

I use the Mosrite names and logos purely for this purpose only. I do not use the Mosrite logos on my Wosrites or for necks not meant for this purpose.